The installation of fire and life safety (FLS) systems is an essential part of both new and existing building. Fire Smoke Dampers (often abbreviated as FSD) are among the most important of them. These devices are installed wherever a heating, ventilation, and air conditioning (HVAC) duct penetrates a fire-rated wall, ceiling, or floor. In the event of a fire, these devices should be able to stop flames and smoke from spreading through the HVAC ductwork, allowing occupants more time to evacuate the building and contributing to the reduction of the amount of damage caused by the fire. However, as buildings and systems age and as physical, mechanical, or electrical problems emerge, dampers can become inoperable. This leaves the duct as an open channel for fire and smoke in the event of a fire, and the facility runs the danger of being shut down owing to a lack of compliance. Verifying and documenting that essential FLS building systems perform as expected is accomplished through the process of testing and maintaining fire smoke dampers.
Building heating, ventilation, and air conditioning system drawings that document the positions of fire smoke dampers
Leak testing and investigations on the pressurized and ducted systems
Testing for FSD in the states of Oregon, Idaho, and Washington
building testing adjusting balancing Portland OR 97225Air balancing is a method of testing your heating and cooling system to spot any problems that are causing uneven airflow or negative air pressure. Once identified, these problems can be corrected so every room gets the amount of air it needs.
Building Management System is used to control and monitor complex HVAC systems as per design intent. It is used to collect data about the performance of the building as well as energy consumption by individual equipment and systems.
Use tabs to alternate between views within the same context, not to navigate to different areas. This is the single most important point, because staying in place while alternating views is the reason we have tabs in the first place.
The key to a comfortable and efficient space is the design and function of a building's HVAC systems. The testing, adjusting, and balancing (TAB) of the systems is what ensures they are functioning properly.