How Much Is A Fiber Laser Machine

Fiber Laser Machine Germany

Laser machines with a fiber laser source use high precision field lenses to increase the energy density and collimate the laser beam at one point.

MCWlaserPRO is made to be used with metal materials such as steel, stainless, silver, bronze, alloy, aluminum, etc.

Some acrylic that is made of PVC emits toxic fumes when it is heated. You should always verify the chemical composition of the materials that you are going to engrave.

Once you have accessed the machine's control through RetinaEngrave version 3.0, you are ready to start your first job. It takes about 30 minutes to complete this task.

Control

Control

Fiber lasers are revolutionizing laser metal cutting industries with their low maintenance costs, high cutting efficiency and lower cost.

After you've logged in to RetinaEngrave, v3.0, your first job can be started. All this can be done in less than 30 minutes.

Fiber Laser Cutting Machine Manufacturers

When lasered, some acrylics made from PVC can emit toxic fumes. It is better to verify the chemical composition of any materials you intend to engrave.

Triumph's 30W desktop fiber laser can engrave on aluminum, gold, silver, steel, stainless steel, copper, and some plastic-like polymer for metal tools and machine parts.

Fiber Laser Cutting Machine Manufacturers

Fiber Laser Machine Video

Contact after-sales via phone, email or social media.

The laser arm is held by the support column (Z-axis). You can adjust the laser focus by moving the Z axis with the height adjustment knob.

Fiber Laser Machine Germany
What are fiber lasers used for

Gulf States Saw & Machine Co., fiber laser systems can etch and mark a wide variety of plastics and metals. Below is only a sample of some of the materials that have been marked with one of our fiber laser systems.

Raycus 50W fibre laser can etch or mark aluminum at a 45 degree angle. This laser uses 100% of its power.

Fiber Laser Cutting Machine Manufacturers

Check our other pages :

Small

Powerful, yet versatile—with a low cost of ownership. A lightning-fast “hybrid” CO2 laser in every sense of the word.

When the water temperature is lower than the ambient temperature and the ambient humidity is high, condensation water will be generated on the surface of the circulating water pipe and the device to be cooled. When the above situation occurs, it is recommended to increase the water temperature or insulate the water pipe and the cooled device.

Frequently Asked Questions

Laser fiber cutting machine

Fiber optic laser cutters are intended to cut metal at high speeds and with pinpoint accuracy. These machines, which have been on the market for more than 20 years, also use a fiber laser power source.

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

The wavelength is the primary distinction that determines the types of materials that each laser can process. The wavelength of a fiber laser is typically 1,060 nm, whereas CO2 lasers have wavelengths in the 10,600 nm range. Fiber lasers have many advantages over CO2 lasers in general.