Systems

Tube Laser Cutting Systems Home

The TruLaser Tube 5000 fiber achieves record speeds. It takes full advantage of the strengths of solid-state lasers. For the user, this means short processing times and a wide range of possible parts.

Let's examine the benefits of using an automated tube storage system and section bar storage system in conjunction with a Lasertube-cutting system.

StarCut Tube SL combines an fs-laser to create complex metal shapes.

Tube extensions are available for loading tube stock to the maximum length of 80", or 6'8". The maximum part size is 52".

Yongli

Yongli

These laser-generating machines can produce up to 12 kW of power. The power of a laser tube cutter machine is typically 5 kW. This is because it cuts through the tube on the opposite side simultaneously.

Some things are quite noticeable. The laser “generator” on a fiber laser is much smaller when compared to a traditional CO2 resonator. In fact, the fiber laser is created by banks of diodes that are put together in a briefcase-size module that can range in power from 600 to 1,500 watts. Multiple modules are spliced together to create the final powered resonator, which is typically the size of a small filing cabinet. The light generated is channeled and amplified through fiber-optic cable. When the light exits the fiber-optic cable, it is the same that is was upon being generated with no loss of power or quality. It is then adjusted and focused for the type of material to be cut.

How do you test a CO2 laser tube

With Lasertube systems, you can create new applications or improve existing ones, entering new industrial sectors and increasing profit margins.

All types, all shapes: This three-dimensional cutting machine will cut carbon, stainless, aluminum and red metals; in round, square, rectangular and irregular shapes.

How do you test a CO2 laser tube

Tube Laser Cutting Systems 6040

You have the option of choosing between 2D and 3-D laser cutting technology. This allows you to make precise and customized cuts in a variety of parts, including tubes with rectangular, square, or rectangular shapes. There is also the possibility to cut profiles with diverse cross-sections (for instance, H, U, T, or Ucross sections). 3D technology not only allows straight cutting edges but also permits bevel cuts up to 45 degrees. This versatility means that you don't need to spend a lot of money on milling. Drilling. Punching. Sawing.

With laser generating technology, sheet laser cutting machines can now be sold with power outputs up to 12kW. A laser tube-cutting machine usually has a power consumption of 5 kW. Any more power would cause the tube to be cut on both sides simultaneously.

Tube Laser Cutting Systems Home
What can a 50w fiber laser cut

The CO2 reactor is larger and consumes more energy. To produce the laser beam, electricity is added to a mixture gas mixture. Mirrors are used to increase the intensity of light, and prepare it for exiting a resonator. The beam must travel through the path of several cooled reflectors until it reaches lens once it has left the resonance. This travel can cause a loss of power or quality in the laser beam.

You will find the perfect solution for your laser fabrication needs, while still ensuring process quality and efficiency in both metal and nonmetal fabricating.

How do you test a CO2 laser tube

Check our other pages :

Tube Lasers Cutting Systems Of America

Imagine having to place a through-hole centered on a tube. It has to be centered to the actual dimension, not just one face of the tube. If the tube is bowed, that’s going to make things more difficult. That’s the life of tube fabricating.

Large diameter profiles and tubes can be made with the fiber solution. Tubes up O 14 inches (355 mm).3D cutting modeFiber Laser