Living in Coram, a quaint little town with its fair share of recreational areas, can be quite the charm. Water damage repair Coram close to community centers . Yet, as with any place, its not without its occasional hiccups. One such hiccup that can really throw a wrench in your plans (especially if youre gearing up for a picnic or a day out at the park) is a burst pipe! Now, you might think that this is just a homeowners concern, but oh no, it can affect public spaces too.
Imagine this: Youre all set for a lovely day at the local park, perhaps near one of the stunning recreational areas Coram is known for. Suddenly, you hear the unpleasant news that a burst pipe has caused some areas to be temporarily off-limits. Ugh, talk about a damper! Its not just the water thats flooding the grounds; its also flooding your hopes for a perfect outing.
Now, lets talk about the nitty-gritty (or should I say wet and wild) part of burst pipe repair near these areas. First off, it aint a simple task. The pipes that service these public spaces are often old, and not always easy to access. When a pipe bursts, its usually due to age, pressure, or sometimes the weather playing tricks on us. Repair teams have to be quick on their feet, cause no one wants a swamp instead of a park.
However, its not just about getting the job done quickly; its about ensuring its done right. After all, nobody wants to experience a déjà vu with the same issue next month. The repair process involves identifying the exact location of the burst, which can sometimes be tricky if the pipes are underground or obscured by nature. Then comes the actual repair, which involves patching up or replacing the damaged section.
One things for sure, the local authorities know that recreational areas are vital for community well-being. So, they dont skimp on resources when it comes to fixing these issues. They bring in qualified professionals who know their stuff. And while it might seem like an inconvenience at the time, it's really just a temporary glitch in the grand scheme of things.
Moreover, the community often comes together in these situations. You might see neighbors and local businesses offering support, perhaps with temporary water stations or helping to spread the word about the situation. Its this sense of togetherness that makes Coram such a special place to live.
In conclusion, while a burst pipe near a recreational area in Coram might not be the highlight of ones day, its certainly a manageable obstacle. The repair process, though not devoid of challenges, is usually handled with efficiency and care. So, next time you hear about a burst pipe in your favorite park, take a deep breath and remember that its just a temporary blip. After all, nothings gonna keep Corams community spirit down for long!
Redirect to:
Coordinates:
40°48′48″N 73°2′50″W / 40.81333°N 73.04722°WCountry United StatesState
New YorkCountySuffolkTownsBrookhaven
IslipArea
7.11 sq mi (18.41 km2) • Land7.11 sq mi (18.41 km2) • Water0.00 sq mi (0.00 km2)Elevation
105 ft (32 m)Population
18,937 • Density2,663.81/sq mi (1,028.53/km2)Time zoneUTC−05:00 (Eastern Time Zone) • Summer (DST)UTC−04:00ZIP Codes
Area codes631, 934FIPS code36-35254GNIS feature ID0953030
Holtsville is a hamlet and census-designated place (CDP) in Suffolk County, on Long Island, in New York, United States. The population was 19,714 at the 2010 census.[2]
The hamlet is mainly in the Town of Brookhaven, while the southwestern portion is in the Town of Islip. An IRS Processing Center is located in Holtsville, along with NYPA's Richard M. Flynn Power Plant.
The hamlet known today as Holtsville included only a few farmhouses in the late 18th century. In 1843, the Long Island Rail Road opened its Waverly station. Maps from that period label the area as Waverly, and a stagecoach line ran north–south along present day Waverly Avenue. As another post office named Waverly already existed in New York, the name of the hamlet was changed to Holtsville in 1860, in honor of U.S. Postmaster General Joseph Holt. As of 1874, Holtsville consisted of 15 houses, a school, and a general store.[3] The train station retained the name "Waverly" for some time, but was eventually also changed to Holtsville, probably in the 1890s, after farmers complained about their shipments going upstate by mistake.[4][5] In 1916, the Suffolk County Tuberculosis Sanatorium opened on land that was considered Holtsville at the time, but is now part of the hamlet of Selden.[6] The site later became the location of the main campus of Suffolk County Community College.
The Internal Revenue Service opened a large processing center on a 67-acre (270,000 m2) site in the hamlet in 1972.[3]
The rail era in Holtsville ended in 1998, when a number of LIRR stations closed due to low ridership.[7] Holtsville commuters were advised to use Medford and Ronkonkoma stations; more use Ronkonkoma because, except for a few peak-hour trains terminating in Mineola or Hicksville, boarding at Medford would require transfer to an electric train at Ronkonkoma anyway.
As of 2016, the Internal Revenue Service in Holtsville has the lowest ZIP Code (00501) in use in the United States.[8]
According to the United States Census Bureau, the CDP has a total area of 7.1 square miles (18.4 km2), all land.[2]
Census | Pop. | Note | %± |
---|---|---|---|
2020 | 18,937 | — | |
U.S. Decennial Census[9] |
As of the census of 2010,[2] there were 19,714 people, 5,316 households, and 4,454 families residing in the CDP. The population density was 2,444.3 inhabitants per square mile (943.7/km2). There were 5,418 housing units at an average density of 778.8 per square mile (300.7/km2). The racial makeup of the CDP was 81.7% White, 1.7% African American, 0.09% Native American, 4.4% Asian, 0.01% Pacific Islander, 0.2% from other races, and 0.9% from two or more races. Hispanic or Latino of any race were 11.1% of the population.[10]
There were 5,316 households, out of which 43.7% had children under the age of 18 living with them, 70.4% were married couples living together, 9.9% had a female householder with no husband present, and 16.2% were non-families. 12.0% of all households were made up of individuals, and 3.4% had someone living alone who was 65 years of age or older. The average household size was 3.19 and the average family size was 3.47.
In the CDP, the population was spread out, with 28.2% under the age of 18, 7.5% from 18 to 24, 33.5% from 25 to 44, 23.9% from 45 to 64, and 6.9% who were 65 years of age or older. The median age was 34 years. For every 100 females, there were 96.1 males. For every 100 females age 18 and over, there were 93.9 males.
The median income for a household in the CDP was $68,544, and the median income for a family was $71,784. Males had a median income of $50,361 versus $31,709 for females. The per capita income for the CDP was $24,031. About 2.4% of families and 3.6% of the population were below the poverty threshold, including 2.7% of those under age 18 and 4.0% of those age 65 or over.
Holtsville is home to the Harold H. Malkmes Wildlife Education and Ecology Center, a public zoo and ecological park located on the site of a former landfill.[11] Some of the amenities at the park include: a triple pool complex; exercise-trail fitness course; nature preserve and ecology center, featuring buffalo, bobcats, eagles, ecology exhibits and tours, free compost, greenhouses and a picnic area.
The Sachem School District serves the residents of Holtsville.[12]
Media related to Holtsville, New York at Wikimedia Commons
Coordinates:
40°53′26″N 73°0′38″W / 40.89056°N 73.01056°WCountry United StatesState
New YorkCountySuffolkTownBrookhavenArea
13.83 sq mi (35.81 km2) • Land13.83 sq mi (35.81 km2) • Water0.00 sq mi (0.00 km2)Elevation
95 ft (29 m)Population
40,220 • Density2,909.01/sq mi (1,123.17/km2)Time zoneUTC−05:00 (Eastern Time Zone) • Summer (DST)UTC−04:00ZIP Code
Area codes631, 934FIPS code36-18157GNIS feature ID0947423
Coram /kÉâ€ÂÂËÂÂÂrÉ™m/ is a hamlet and census-designated place in the town of Brookhaven, Suffolk County, Long Island, New York, United States. As of the 2010 United States census, the CDP population was 39,113.[2]
Coram is the oldest settlement in the central part of the town of Brookhaven. Its early name was "Wincoram", perhaps the name of a Native American who lived in the area as late as 1703. The first European settler in the area was likely William Satterly, who sought permission to open a tavern to cater to travelers in 1677.[3]
During the American Revolutionary War, Benjamin Tallmadge with his contingent of Light Dragoons arrived and he with 12 Culper Ring men captured and burned 300 tons of hay the British were storing for winter to feed their horses.[4] George Washington, on hearing the news, sent the following letter to Tallmadge: I have received with much pleasure the report of your successful enterprise upon fort St. George, and was pleased with the destruction of the hay at Coram, which must be severely felt by the enemy at this time. I beg you to accept my thanks for your spirited execution of this business. Annually Coram celebrates the event in October.
From 1784 to 1885, Coram served as the meeting place for the Town of Brookhaven government, using the Davis Town Meeting House for much of that period.[5] The Davis House, built in the 1750s, was placed on the National Register of Historic Places in 2001 and is the oldest existing structure in Coram.
A small airport, known as Coram Airport existed in Coram until 1984; the land is now part of a county park.[6]
The CDP has a total area of 13.8 square miles (36 km2), all land.[7]
The 73rd meridian west passes directly through Coram.[8]
Census | Pop. | Note | %± |
---|---|---|---|
1980 | 24,752 | — | |
1990 | 30,111 | 21.7% | |
2000 | 34,923 | 16.0% | |
2010 | 39,113 | 12.0% | |
2020 | 40,220 | 2.8% | |
U.S. Decennial Census[9] |
As of the 2000 census,[7] 34,923 people, 12,530 households, and 9,121 families resided in the CDP. The population density was 2,532.1 inhabitants per square mile (977.6/km2). There were 12,880 housing units at an average density of 933.9 per square mile (360.6/km2). The racial makeup of the CDP was 89.5% White, 1.7% African American, 0.3% Native American, 3.1% Asian, 0.0% Pacific Islander, 3.1% from other races, and 2.3% from two or more races. Hispanic or Latino of any race were 9.5% of the population.
There were 12,530 households, out of which 35.3% had children under the age of 18 living with them, 57.9% were married couples living together, 11.4% had a female householder with no husband present, and 27.2% were non-families. 21.3% of all households were made up of individuals, and 6.1% had someone living alone who was 65 years of age or older. The average household size was 2.75 and the average family size was 3.22.
In the CDP, the population was spread out, with 25.1% under the age of 18, 7.9% from 18 to 24, 33.5% from 25 to 44, 24.1% from 45 to 64, and 9.3% who were 65 years of age or older. The median age was 35 years. For every 100 females, there were 93.1 males. For every 100 females age 18 and over, there were 89.2 males.
The median income for a household in the CDP was $61,309, and the median income for a family was $70,769. Males had a median income of $46,905 versus $34,545 for females. The per capita income for the CDP was $24,597. About 4.1% of families and 5.6% of the population were below the poverty threshold, including 5.5% of those under age 18 and 7.2% of those age 65 or over.
cite book
: |work=
ignored (help)