Laser Engraving
Raycus 50W fiber-laser can be used to engrave steel at 90 degrees angles. It uses 100% of the laser's power.
Fiber lasers are popular for engraving metals, as they can engrave much more accurately than generic CO2 Lasers.
Fiber Laser Cutting Machine Nozzle
FM-Desktop, a mobile engraver machine, has a footprint of 33.5" x 24-.5". This machine can mark on 4.33"x4.33", which makes it ideal for small projects like laser engraving knives.
Gulf States Saw & Machine Co. can engrave acrylics and hard-plastics brick, granite marble, tile.
Gulf States Saw & Machine Co. (FM1212-50S) uses a Raycus 50W, solid-state fiber laser. It has a lifetime of 100,000 hour.
FSL Muse Pandora, 20W, can deep engrave Silver at a speed of 708 IPM using 100% laser power.
Raycus 50W fiber-laser can be used to engrave steel at 90 degrees angles. It uses 100% of the laser's power.
Fiber lasers are popular for engraving metals, as they can engrave much more accurately than generic CO2 Lasers.
Our machines are extremely efficient at cutting steel, brass, stainless steel, and aluminum with no risk of background signal interference. These fiber laser machines can significantly reduce your maintenance requirements and operating costs.
The 30W fiber-laser can engrave in stainless steel at a angle of 90 degrees and at speeds of up to 3,543 ipm. This laser uses 100% of its power.
The machine is controlled using RDWork or LaserWorks software. You can download them freely from their respective website.
Designed by Mitsubishi engineers and built with Mitsubishi components, the GX-F Series is one of the only laser systems in the industry with a single source for service and support.
You can use a Raycus 50W laser to engrave stainless steel at a 90deg angle and with a speed up to 3,540 ipm.
To increase engraving area from 7.87"x7.87", to 11.81"x 11.87", you'll need a 50W or 30W fiber laser.
High-concentrated power lenses with a longer focal length are used to expand the engraving area.
When it comes to cutting various Fiber laser machines are more efficient at cutting thin metals. A fiber laser machine can cut thin metals efficiently up to 25mm or 1 inch. After that, fiber lasers start cutting metal less efficiently. You would need high amounts of power, which by the way cost a lot more money, to cut ticker metals above 25mm or 1 inch.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.