Beam Coping Machine Auger

In the same way that the Voortman CNC Beam Drill Line and the Voortman Clipper CNC Angle Line brought affordable automation of beams and angles to the small-to-medium fabricator, the Voortman Liberator similarly brings automated beam coping into shops that otherwise could never have considered it.

Your detailer will then provide you with a DWG/PLT/PDF file that you can use to print your drawings or plot them. The detailer will also provide you with the NC1 and NC2 files you will use to import into your computer. Voortman has the DSTV Import function.

Our top-of-the-range coping/profiler robot makes 3D coping and profiling much easier. These Robotic Coping beams and Profiling beams not only work well, but they can also be used to cut slots, chamlers, and saddles.

AutoCAD can be used to export flat 2-D pieces to plate-processing machines. It is not able to export files for 3-D shapes such as angles, beams, channels, etc. AutoCAD can export both DWG and DXF files, which is perfect for plates.

This CNC beam coper with single torch eliminates the need for manual laying of your copes. Instead, it makes sure that your CNC detail drawings are accurate and precise and your copes are completed neatly.

We provide service for all steel fabrication machinery. To schedule an appointment, please contact us.

Three torches allow simultaneous oxy-fuel cutting, resulting in unbeatable speed and efficiency. The ABCM-1250 CNC beam cutter machine is capable both of mitering as well beveled weld preparation at the top or bottom flanges.

The basic unit consists of a semi-automatic, oxygen-fuel coping device. Operator positions the workpiece, adjusts the torch height, and fine tunes it. There is also an automated option that allows the laser to probe the area and set its torch height automatically. The basic unit is equipped with powered conveyors. This allows the operator to measure and mark the feedstock's X length before it can be cut. An optional automated measuring system can be added via Laser measurement of the feed stock. The operator can input the type of material to be cut using the interface. The computer touch screen displays a list of choices that the operator can scroll through. The computer has all dimensions for the AISC structural metal. It is possible to program the computer with a fully dimensioned handle drawing. This simplifies the process and reduces errors. The operator can customize and override any input and save it as a new programme, if necessary. The machine can be programmed remotely using DSTV exported drawing. Operators can control the equipment using a wireless remote. This allows the operator to view from any angle necessary to inspect operations and keep accuracy. The operator places his mark on the material, moves it into place, clamps hydraulically the material to be cut, and then checks for accuracy. The laser is aligned by the operator, and the cycle starts. The torch lights, preheating the material. The operator initiates the cutting process by hand and completes the job as long as the torch height remains constant.