Can You Drill Through A Load Bearing Beam

Cnc Beam Drill Line Drawing

MultMaster functions as an extension to the Roller Feed measurement method. This allows for cuts that might otherwise require manual positioning. This accessory makes it easy to process material on a Voortman saw and drill tandem system.

The programming of the CNC Beam Drill Line can be done intuitively even by operators who have never used a computer or CNC.

Let's examine the real world fabrication situation and compare Insert Drill Bits with Twist Drill Bits. We'll only look at one example: 13/16 inches (22mm) is the most widely drilled hole.

The CNC Beam Drill Line is designed specifically for fabricators and general job shops that need to put holes in steel profiles of all types. Consider the following questions and determine if this machine fits your needs.

Cnc Beam Drill Line Drawing
What are the 4 types of beams

What are the 4 types of beams

AC Unit on Electrical Cabinet. - The unit can be mounted on the cabinet’s High power (480v), side. It is in close proximity to the location that the drives are located. This option maintains the cabinet temperature and speeds up heat dissipation. All axes' servo drives are the major contributors to heat within the electrical cabinets.

The Franklin HD145 (3) CNC spindle drill has a 44-inch width. The HD-145 can handle beams up to 775 lbs per foot. High-performance spindles are capable of drilling at speeds up to 2,000 RPM. This rigid design allows for extremely fast feed rates of up to 300 feet per minute. You can order the Franklin HD145 with a variety of material handling packages, ranging from 300 lbs per feet to 750 lbs each foot.

Peddinghaus Cnc Beam Drill Line

The CNC machinery you choose to purchase can be a Vertical Machining Machine or a CNC routing machine. These two pieces can be used to accomplish many different things. Which one should you...

The MultMaster works as an extension of the Roller Feed measurement system in order to perform cuts which may otherwise require manual positioning for programs with many small pieces. This accessory allows fast and simple material processing on a Voortman drill and saw tandem system by automating the processing of short remnant sections.

Peddinghaus Cnc Beam Drill Line

Cnc Beam Drill Line Number

The Advantage-2 is powered 25 HP (18.5 kW), Siemens spindlemotors. It comes with 3 drill spindles and 5-station tool changers. This powerful drilling technology allows you to maximize your operating time and drill hole performance.

AC Unit installed on Electrical Cabinet – The unit is mounted on cabinet's High Power side (480v). It is right next to the location of the drives. This allows the cabinet to maintain a stable temperature and heat dissipation to occur faster. The most important contributors of heat to the electrical cabinet are the servo drive for all axes.

Steel Industry

The Franklin HD145 (3) spindle-cNC drill is 44 inches wide. The HD-145 can lift beams of up to 750 lbs per feet. The high-performance spindle design allows drilling speeds of up to 2000 RPM. The rigid design of the spindle allows for very aggressive feed rates, up to 300 ft per minute. There are many material handling options available for the Franklin HD145, from 300 lbs to 750 pounds per foot.

Even if you are programming the CNC Beam Drill Line manually, it is easy to program. Peddimat machine programming software can be used and most operators will learn how to program most of the parts in under an hour. Of course practice makes perfect. It is best to program the machine by importing parts directly from a 3-D modeling program such as ProSteel 3D, StruMis, Tekla Structures, SDS/2 or StruMis. These files are imported directly into your machine. Once you have selected the part, hit the Cycle Start button.

Peddinghaus Cnc Beam Drill Line

Check our other pages :

Drill Bits

The CNC Beam Drill Line works very well and Avenger operators were often the ones doing the layout. It is not necessary to have any computer knowledge. Full training is given at the time the installation is completed.

Voortman makes machines for GSS Machinery in order to meet our exact specifications. GSS Machinery targets small- to medium-sized fabricators, while Voortman targets larger fabricators. Voortman has been designing machines for GSS Machinery since more than 10 years. GSS Machinery is Voortman's largest customer globally.

Frequently Asked Questions

The hole size should not exceed 38mm (1.25 in.). The beam depth should not exceed one-tenth of the hole diameter, whichever is less, with the exception being 25mm (1 in.).

Beam can support strain and pressure, while bars can maintain pressure (intended to take pressure). The Rods/Bars refer to any part that is exposed to the hub (Tensile/Compressive but no Transverse/Torsional load) Loads, as it were.

The H beam's cross section is more robust than that of the I beam. This means it can support a heavier load. The cross section of the H beam, on the other hand, can only bear direct load and tensile. However, it cannot resist twisting due to its narrow cross section. It can only bear force in one direction.

Drill blowout can be prevented by attaching a scrap of wood to the backside the piece that you are drilling on. When you drill the whole, wood that would have otherwise "blown out", hits the scrap wood instead and stays in place.

You will need at least 4-2x16 or 8x16 wood beams to span 20 feet. A 4 nailed 2x16, 4-2x16, or 8x16 wood beam will allow you to span 20 feet.