Layout

Cnc Beam Drill Line Guide

GSS Machinery offers a variety of drilling options to drill with your CNC Beam Drill Line.

"..We have installed a new beam-drill line in an effort to satisfy customer needs and increase production. The result has been a reduction in labor costs and faster turnaround times which have consistently helped us land quality job opportunities.

The CNC Beam Drill Line is programmed either manually on the machine or by using the Peddimat program. This software is included in the AVENGER. It can be installed on any number of computers in your office that you like. It is the exact same software as the machine, and it is also used on all Voortman CNC fabrication machinery.

Voortman proudly offers technical support 24 hours a day to its global clients. Voortman’s inside service staff have years-long experience in the field or assembly. They also have hands-on knowledge with many machines. Voortman's service personnel are always available to help you with any question that might arise.

Process

Process

"..In order to meet customer demand and increase production, our beam drill line was installed. The resulting lower labor costs and faster turnaround times have helped us land quality jobs.

The Advantage-2 employs a series of support clamps in order to achieve optimum rigidity of the workpiece through the machine. Carbide tool life is best sustained with the least amount of vibration possible.

Drilling Machine

Z-Reader Probe-The Z-Reader Probe is a device that maps the location of the surface. It can be programmed or manually controlled. It can be disabled while cutting, and it can be pulled out of harm's reach. It can be activated to verify the surface at each pierce prior to cutting, or to drive surface mapping for the entire part before cutting begins. It is used to initialize or zero the device to the desired surface and then tracks or accumulates the difference between that zeroing effort.

The UNIST MQL Coolant System has emerged as the leading coolant system in the USA over the past 10 years. It has been standard equipment for the Aveger FORTY (Plus), Avenger PLUS (Plus) and Clipper. This minimal quantity lubricant is an oil-based coolant that prolongs tool life. It is not toxic.

Drilling Machine

Cnc Beam Drill Line Capacity

Voortman's 24 Hour Tech Support Center can resolve 90% of support issues. However, there are 50+ Voortman field personnel stationed all over North and South America, Europe and Africa.

Voortman’s roller feed measurement system exceeds industry standard. It is important to maintain accurate measurements without hesitation during production. Even though there may be slight deviations in the material, accuracy should not be compromised.

Countersunk Holes

CNC Beam Drill Line has the ability to import DXF files. They can then be used to produce 3-D shapes as long that the steel is prepared according to certain rules. These rules might not apply to what you are currently detailing. This may mean that some adjustments might be required. This process isn't as seamless as the 3D modeling software solutions.

Renishaw 5Axis Calibration – The calibration unit used is a Renishaw model APCA45 and a modified spherical pen. It has a retractable cover that can be removed and an air purge that will remove any dust or debris from the device during activation. It is mounted to a swingarm controlled by a pneumaticrotary. The device swings into calibration for calibration only.

Drilling Machine

Check our other pages :

Cnc Beam Drill Line Hookup

The CNC Beam Drill Line can not only process columns and beams, but also all steel profiles, including channel, angle and flat bars, base plates, RHS square and round.

The FlexBeam is a newly launched machine tool developed for fast, accurate, and economic production of steel profiles. This machine is an efficient beam processing solution for small to medium-sized fab shops, looking to take on larger jobs.

Cnc Beam Drill Line Guide

Frequently Asked Questions

The maximum concrete aggregate size will determine the spacing between bars in a beam. Between the bars, the minimum spacing can be between 50 and 75 mm.

Concrete beams can be strengthened with steel reinforcement rods. A beam is subject to tension at the bottom and compression at its top. Concrete is strong enough to withstand great compression but very fragile when it experiences tension.

To reduce the chance of the beam escaping from the concrete column, the development length is required. It acts as a support member for the reinforced beam within the concrete column.

These are the Four Types of Steel Carbon Steels. Only trace amounts of other elements are found in carbon steels, including iron and carbon. ... Alloy Steels. By adding alloying elements such as nickel, copper and chromium to the steel, you can create alloy steels. ... Stainless Steels ... Tool Steels.

C-channel frames are stronger against rust.