Cnc Drill Line 34

Cnc Drill Line Attachment

Advantage-2 employs support clamps that ensure the best rigidity for the workpiece. Carbide tool lives are best maintained with as little vibration as is possible.

Voortman proudly offers technical support 24 hours a day to its global clients. Voortman’s inside service staff have years-long experience in the field or assembly. They also have hands-on knowledge with many machines. Voortman's service personnel are always available to help you with any question that might arise.

Cnc Drill Line 6 Sands

Z-Reader Probe- The Z-Reader probe is used to map the surface. You can control it manually or programmatically. It is not active during cutting and can be retracted to keep it out of harm's path. You can trigger it to check the surface at each pierce before cutting begins. Or, you could use it to drive the surface mapping of the entire part. It starts with the initialization of the device to the surface at program start. The difference is then accumulated or tracked.

The Advantage-2 is powered 25 HP (18.5 kW), Siemens spindlemotors. It comes with 3 drill spindles and 5-station tool changers. This powerful drilling technology allows you to maximize your operating time and drill hole performance.

Cnc Drill Line Kit

Cnc Drill Line Kit

We have installed more than a thousand CNC Drill Line and angle lines throughout the world and we have found that the average operator, who has never before programmed a machine before, can become efficient on the machine in less than 1/2 day.

After the Voortman technician has completed calibrating and installing your machine, he will spend some time with your operators to teach them our simple but thorough training program. The following training will be provided to your operators:

Cnc Drill Line Types

Advantage-2 uses a variety of support clamps to ensure maximum rigidity through the machine. Carbide tool life can be extended by reducing vibrations as much as possible.

For 50 years we have been developing machines and solutions for you as a steel fabricator. We focus on automation as a response to the ever-decreasing ability to find quality labor and rising labor costs, so you can lower your overall production costs and increase your margins.You can ensure the utmost productivity, accuracy and reliability with one of Voortman’s CNC Beam Drill lines. Our CNC Beam Drill Lines integrate many functions like drilling, milling, marking, countersinking, thread-tapping and more to increase capacity and automation and optimize your workflow. Due to Voortman's complete range of advanced Beam Drill Lines, there is a suitable Beam Drill Line solution for every type of production or company.

Cnc Drill Line Types

Cnc Drilling Line Operation

AC Unit Mounted on Electrical Cabinet. The unit is located on the cabinet's High-Power (480v) side. It is located close to where the drives are installed. This allows for faster heat dissipation and keeps the cabinet's temperature stable. All axes have servo drives that are the main contributors to heat in the electrical cabinet.

CNC Drill Line offers the most affordable CNC beam drilling line available today, which allows the fabricators to win more jobs and make more margin.

Cnc Drill Line Attachment
Cnc Drill Line Up

Voortman’s roller feed measurement system exceeds industry standard. It is important to maintain accurate measurements without hesitation during production. Even though there may be slight deviations in the material, accuracy should not be compromised.

Advantage-2 carbide drills are equipped with electronic ball screw feed spindle motors and an automatic tool changer technology. Combining these features with Voortman’s well-known build quality as well as mechanical design, the result is a combination that combines agility and strength.

Cnc Drill Line Types

Check our other pages :

Cnc Drill Line Tab

A 4-axis layout attachment eliminates human error from manual layout methods. The part information can still be used after blasting, painting, or galvanizing.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Frequently Asked Questions

IS-456 (2000) Clause 29 states that a supported beam can be classified as deep if the ratio of its effective span to its overall depth D is less then 2. Continuous beams are classified as deep if the ratio L/D falls below 2.5. The centre-t is the measure of effective span.

Size of an LVL beam for a 20-foot span: As a general rule, a GLULAM or LVL should measure 10-12 inches in depth and 3 inches in width for a span of 20 feet. This means that a GLULAM or 10-12 inch GLULAM is required for residential buildings or projects.

Step one is to determine the beam's total load and live load. Identify the type of load that you are supporting (roof, floor, or non-snow) and then choose the span you require. Match the live load and total loads to the values in the tables. You will see the thickness and depth of each required member.

The span and loading conditions will determine the beam's overall depth. For simple supported beams, it can be taken to be between 1/12 and 1/15 of their span.

The effective depth of the slab and beam is the distance between the extreme compressive concrete fibre and the centroid tension reinforcement in section under flexible condition. It is also known as the distance between the centroid Steel of tension and the outermost face of the compression fibre.