Beam Drill Lines

H Drill

GSS Machinery wants to give you as many options possible when drilling with your CNC Drill Line and any other CNC Beam Drill Line.

Voortman created today's CNC beam drill standard using time-tested technology. Advantage-2 processes on average 150 tons of steel per week. Advantage-2 uses the most efficient drilling and milling operations, including tapping, tapping, and countersinking.

The CNC Drill Line is a 100% hydraulic machine making maintenance and parts exceptionally affordable. The CNC Drill Line was designed specifically to be used throughout the world and thus uses only components from major manufacturers, most of which can be sourced in the local market. Voortman keeps all parts on hand for next day delivery in the USA. In most of our overseas countries we offer local service and support.

The CNC Drill Line is designed specifically for fabricators and general job shops that need to put holes in steel profiles of all types. Consider the following questions and determine if this machine fits your needs.

Cnc Drill Line With End Mill

Cnc Drill Line With End Mill

Over the last ten years, the UNIST MQL cooling system has emerged as the dominant system for coolant in the USA. It is standard equipment on the Aveger FORTY/Avenger PLUS and Clipper. This minimal quantity coolant is made from oil and promotes longer tools life. It is non-toxic.

Z-Reader Probe-- The Z-Reader Probe can be used to locate the surface. It can be used to programmatically or manually. This option is not activated while cutting and is easily retracted. It can be used to verify the surface of each pierce, or to map the entire surface before cutting begins. It starts by initializing or zeroing the device to a surface at the start of a program. After that, it accumulates or tracks any difference.

Automatic Tool Changer

To ensure smooth operation and low maintenance, our beam drill machine machines come with linear guides and central lubrication. A 4-station tool changer is included in each coordinate system. It allows it to drill/mill, scribe/counter sink or tap as necessary. The tools can also be changed easily mid-operation. An arm attached to the rack and pinion on the feed conveyor is used to position the beam while it passes through the drill. Our steel beam drill lines are much more accurate that friction roller machines.

Voortman is the only manufacturer of the CNC Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.

Automatic Tool Changer

Peddinghaus

Z-Reader Probe-The Z-Reader Probe is a device that maps the location of the surface. It can be programmed or manually controlled. It can be disabled while cutting, and it can be pulled out of harm's reach. It can be activated to verify the surface at each pierce prior to cutting, or to drive surface mapping for the entire part before cutting begins. It is used to initialize or zero the device to the desired surface and then tracks or accumulates the difference between that zeroing effort.

Voortman exclusively designed and built the CNC Drill Line to fit GSS Machinery. Voortman oversees all aspects of the CNC Drill Line, including warranty and service. Voortman acts as the service provider. GSS Machinery will always assist should the need arise.

Cnc Drill Line Machine

It is obviously preferable to import files directly from your steel detailing software because it eliminates an unnecessary step and also eliminates possible incorrect data capture. There are two separate and distinct camps in this respect:

We have used more than 1,000 CNC Drill Line and Angle Lines in the world. We have found that even an experienced operator who has never programmed before can use the machine efficiently in less than half an day.

H Drill
Automatic Tool Changer

Check our other pages :

Cycle

The UNIST MQL lubricant has evolved to be the most popular coolant system in America over the past ten years. It is now standard equipment on Aveger FORTY, Avenger PLUS, and Clipper. This low-intensity lubricant, which is oil-based, promotes longer tool life. It is safe for use.

FlexBeam is a new machine tool designed for the fast, precise, and economical production of steel profiles. This machine is an efficient solution for beam processing in small- to medium-sized shops that are looking to take on larger projects.

Frequently Asked Questions

Flange of T-beam/L-beam refers to the portion of the slab that acts in tandem with the beam to resist loads. The beam below the flange can be called Web or Rib. The T-beams support the slab, while the L-beams support it.

As a minimum beam diameter, all structural engineers recommend a 12mm dia bar.

Beams are designed to allow vertical deflections of no more than 1/180 (or 0.55%) of the horizontal beam length measured at the ends of beams.

The shorter beam will therefore be stronger when carrying the same load. To compare beam strengths, it is necessary to take into account more than the section modulus.

Codes do not specify beam dimensions. These requirements are related to reinforced concrete beams' width-depth ratio. As a general rule, it is best to use depths that are two-and-a-half to three times the beam width. It is more economical to use narrower sections for long-span beams.