Cnc Drill Line Ii

Voortman machines are the world leaders in structural steel fabrication technology. Steel fabricators that own Voortman machines uphold an advantage in the steel industry and have the ability to optimize tonnage capacity. The Advantage-2 CNC beam drill line is the backbone of any structural steel fabrication shop. High-speed, multi-spindle, relentless carbide drilling is the very core of this machine. The design of the Advantage-2 has created one of the most profitable drill lines in the steel industry. A heavy steel frame ensures this drill line will support shops for the long haul. The Advantage-2 can run profiles end to end with no stop in production all thanks to the roller feed design on the infeed and outfeed. Hundreds of fabricators across the globe run hundreds of thousands of tons of steel through their Advantage-2s year after year.

The Morse Taper adaptor lets you use standard parallel shank drill bit sizes when drilling smaller diameters. The maximum drill diameter is?" It allows a maximum drill diameter of 12mm and a minimum drilling diameter of 3/64's (1mm).

Programming the CNC Drill Line for new operators is simple and intuitive, even for those who don't have any computer or CNC experience.

Voortman proudly supports our global clientele with technical support that is available 24 hours a days. Voortman's staff are highly skilled in all aspects of the service industry, including assembly and factory checkout. They have extensive experience with almost all machines. Voortman’s service staff is always there for you, and they have the knowledge to resolve any problems that arise.

Voortman’s CNC Beam Drill Lines often come in combination with a Drill Saw Line or larger fully automated integrated production line, commonly referred to as Multi System Integration. You can find out more information about it here!

The UNIST MQL Coolant System has emerged as the leading coolant system in the USA over the past 10 years. It has been standard equipment for the Aveger FORTY (Plus), Avenger PLUS (Plus) and Clipper. This minimal quantity lubricant is an oil-based coolant that prolongs tool life. It is not toxic.

Importing files directly to your steel detailing tool is preferable. It removes the need for an extra step and helps eliminate any possible errors. There are two distinct and separate camps in this regard.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.