Steel

Fiber Laser Marking Machine Applications

Fiber lasers are much more efficient than CO2 lasers and use less energy. They also operate at a shorter wavelength, between 780 and 2200nm, which gives them a higher absorption rate.

FSL Muse Pandora's 20W version can deep engrave sterling at a speed up to 708 ipm using 100% of its laser power.

Plasma can be complicated to understand. Let me explain it as quickly and clearly as I can. Plasma cutters heat gas to the point that it melts metal. Once the metal has melted, the gas is used to blow it away. This is a complex science, but I will save that for another day. You can also research it yourself if you wish.

Hopefully you learned something in this post. Just remember, I will always be updating posts on my website. So be sure to come back and learn some more. Thank you for reading, and hope you come back to learn some more. Also, come and check out our laser machines! This is William from Senfeng and hope you have a great day!

Fiber Laser Cleaning Machine

Fiber Laser Cleaning Machine

FSL Muse Pandora can now be upgraded by adding a rotary and expanded Z-travel, fume extractions, and special focus lenses.

Triumph's 30-W desktop fiber laser can be used to create two lenses. The first gives you a 4.3 inch x 4.3 inch engraving area and the second gives you a 7.8 inches x 7.8".

How can I buy a laser engraver

The components as well the FM-Desktop fiber laser are covered by a 30-day guarantee and a 2-year parts and labor warranty.

Safety glasses should be able to block laser light from 1064 nanometers when purchased for this machine.

How can I buy a laser engraver

Fiber Laser Marking Machine 100w

Amazon does not have an official return policy. However, you can get a replacement within 30 days if you order through Amazon.

Boss Laser has CorelDRAW 2020 available as an optional add-on for the FM Desktop engraver machine.

Fiber Laser Marking Machine Applications
Fiber Laser Engraving Machine Uk

Refraction bends light in an optical fiber laser. The optical fiber cable passes light through an opaque silica glass core that is impure and transparent. Cladding is a layer of silica that has been doped with other materials to reduce its refractiveindex. The core-clad interface will reflect light due to the difference in their refractive index.

For engraving larger areas, you will need a 30-W or 50W laser fiber to upgrade to 7.87"x7.87", or 11.81"x11.87".

How can I buy a laser engraver

Check our other pages :

Fiber Laser Cutting Machine Usa

You can use a Raycus 50W laser to engrave stainless steel at a 90deg angle and with a speed up to 3,540 ipm.

Boss Laser delivers FM-Desktops preassembled. They also offer technical support at-site to their customers.

Frequently Asked Questions

To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.
 

In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.

Power consumption is extremely low.

A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.