Tube Laser Cutting Systems Rental

Tube Lasers Cutting Systems Nj

ExactCut 430, a laser cutting machine for precision processing of thin and large metals and all alloys, brittle material like sapphire or PCD, is available.

Laser combination system for sheet metal and tube cutting. Tubes up up to O 4.72 inches (120 mm).Sheets to 236"x79". (6000 mmx 2000 mm).Fiber Laser

Many believed fiber lasers could only work with thin materials. Because CO2 has a longer wavelength, it created enough material kerf to permit material removal. Fiber lasers can't produce the same level of kerf and results with thicker materials. This has been corrected by collimating tech, which can produce a wide fiber laser-generated beam that allows for materials separation. It also makes it possible to allow for material removal in thicker materials. You can also switch the beam width so that the machine can process thin materials with the narrower beam. This allows you to process more materials in a shorter time.

With a laser tube-cutting machine, there are no standard towers. Bundle loads are the most efficient method for handling tubes. These loaders feed one tube per bundle into the tube cutter via a singularizing mechanism. This feeding method is not compatible with open profiles such as angles or channels. Because they interlock within a bundle, and don't allow for easy release, this type of feeding doesn't work. Step loaders are employed for open profiles. These machines sequence one section at a time and maintain the correct orientation.

Tube Lasers Cutting Systems Miami

Tube Lasers Cutting Systems Miami

Fiber lasers are capable of cutting thin materials with high speeds. Fiber lasers are very efficient and low in power consumption, but require very little maintenance. Laser cutting technology is able to cut steel, stainless and aluminum as well as nonferrous metals such copper and brass.

Variety is the reality of any job shop, and the same goes for those that operate a tube laser. It’s not unusual to see parts of various sizes come from one tube. The machine must be able to unload laser-cut parts that may be as small as 2 in. and as long as 15 ft., one right after the other. It also must be able to unload those parts without damaging them, which can be a challenge with softer metals such as aluminum.

Angle Iron

Learn how the Coherent StarCut Tube, StarFiber laser-powered cutting tools helped NPX Medical achieve a competitive edge when it comes to stent manufacturing.

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.

Angle Iron

Lasertube Systems

StarCut Tubes SL is a laser cutting system that provides high accuracy, superior reliability, as well as high performance for cutting complicated medical devices such stents.

StarFeed can be used as an automated loader/unloader to the StarCut Tube laser cutting machine. It comes in two sizes, S and L. The StarFeed allows you to fully automate dry and wet cutting for tubes of any diameter from 1-20mm. StarFeed L can store 48 tubes and allows processing of oval tubing. Its sensor-controlled gripping unit avoids damage. The result is a substantial increase in productivity.

Tube Lasers Cutting Systems Nj
Tube Laser Cutting Systems Non Metal

You can take a look at our StarCut Tube production area and lab to learn more about these multi-axis CNC machines for tubes, flat materials and medical devices like catheter shafts and hypotubes.

You will be able to see the fiber laser in action for a better understanding of some things. A fiber laser has a higher power density than a CO2 beam because its beam diameter is usually one-third of that of a CO2 beam. This allows the fiber to cut faster and pierce more quickly. The fiber can also cut intricate shapes and leave sharp edges thanks to the smaller beam size. A fiber laser can cut a logo for a company out of a tube with a spacing of 0.035 inches between letters.

Angle Iron

Check our other pages :

Final Accuracy

Processing tubes and profiles can be used in many different ways. You can use them in many industries, including the automotive industry, furniture design and architecture, as well as commercial vehicle construction. Laser-assisted processing of profiles and tubes offers many options for unique design and a manufacturing range that is almost limitless.

What can you do to compensate? You will traditionally touch your face with a sensor to mark the contact point. The tube is then turned and touched on the other side. This gives the control an indication of how bent the tube is. This is a reliable method that can guarantee the through-holes are working for the application. However, this method reduces the ability to deliver extremely high tolerances for each rotation of the tube.