Laser Technology

Laser Tube Cutting Machines Blm Group

Record speeds are achieved by the TruLaser Tube 5000 fiber. This fiber takes full advantage the solid-state laser's strengths. This means that the user can process quickly and have access to a large number of parts.

Fitness equipment must be built with the highest standards of design, durability, usability, efficiency, and compactness.

Learn how the Coherent StarCut Tube laser-powered cutting machines and StarFiber laser cutters helped NPX Medical to gain a competitive advantage in stent manufacturing.

These images are intended to be used as illustrations and may not accurately represent the product. Gulf States Saw & Machinery Co., Inc. reserves all rights to modify product specifications and images at any time.

Tube Lasers Cutting Systems Of America

Tube Lasers Cutting Systems Of America

Some things are difficult to see until you have a closer look at the fiber laser operating. Fiber lasers have a larger power density than CO2 laser beams because their beam diameter is typically one-third that of CO2 beams. This allows fiber to cut more quickly and also allows it pierce better. This allows the fiber to cut intricate shapes with sharp edges and leaves a smaller beam size. Imagine that a fiber can cut the company logo from a tube with spacing of 0.035 in between its letters; a CO2 laser is incapable of doing this.

StarFiber Series are compact fiber lasers that include optional focusing heads. These can be used for laser cutting and welding, or for laser cutting. SmartWeldTM technology is available for fine welds.

Tube Laser Cutting Systems Light

Check out our StarCut Tube laboratory and production area to see more about these fully-automated multi-axis CNC machine for tubes and flat materials.

You may have noticed that we haven’t discussed cutting speed yet. It is possible to cut up to 500 inches per minute on a tube, but that’s not always realistic. In laser tube cutting, the real focus should be on how long it takes to load a tube, index it so it’s in the right position for cutting, pierce and cut it, and unload the part. It’s more about part-processing time with laser tube cutting machines, not cutting speed.

Tube Laser Cutting Systems Light

Materials

The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.

The Coherent StarCut Tube hybrid version offers the best flexibility to cut different medical devices in metals and plastics from flat stock or tubes. This compact, turnkey laser machine combines two lasers into one compact housing.

Can you laser cut a cylinder

Due to the high power needed to create a CO2 Laser, it is less efficient than a fiber-laser. Also, the large chillers that are required to make CO2 lasers work require more power. You are using less power due to the fiber laser's wall plug efficiency exceeding 40 percent. This means that you also use less of your floor space in high-demand areas.

All types and all shapes: This 3-dimensional cutting machine cuts carbon, aluminum, stainless, and red metals. It is available in round, rectangular, irregular and square shapes.

Laser Tube Cutting Machines Blm Group
Tube Laser Cutting Systems Light

Check our other pages :

Tube Laser Cutting Systems Union Grove Nc

Motion Dynamics is a leading manufacturer of neurological sub-assemblies, including steerable catheters and “pull-wire” assemblies, making use of our StarCut Tube machines for precision cutting of key components.

These laser-generating machines can produce up to 12 kW of power. The power of a laser tube cutter machine is typically 5 kW. This is because it cuts through the tube on the opposite side simultaneously.