At what point we can use T-beam

Cnc Beam Drill Line Jack

Yes. We have many CNC Drill Line installations outside. However suitable weather protection must be provided to the control panel and moving mobile platform. Please feel free to contact us to see photos from many of our outside installations.

We believe that, based on current pricing, the customer is better served with good quality Ocean Penetrator Twist Drill Bits and a good sharpener.

The Franklin HD145 (3) spindle CNC drill, with 44-inch width capacity. The HD-145 handles beams up to 750 lbs per foot. The hi-performance spindle design provides drilling capabilities up to 2,000 RPM. This rigid design provides extremely aggressive feed rates up to 300 surface feet per minute. The Franklin HD145 can be provided with several material handling packages from 300 lbs per foot, to 750 lbs per foot.

The CNC Drill Line can either be programmed at the machine by hand or via the Peddimat software. The AVENGER includes this software and it can be installed on as many computers in your office as you wish. This unlimited license comes with your machine purchase. This software is identical to the one found on the machine and can be installed on any Voortman CNC fabricating machines.

How do I choose the right size beam

How do I choose the right size beam

We have seen more than 1000 CNC Drill Lines, and angle lines installed all over the world. We found that the average operator can program a machine in half the time, even if they have never programmed one before.

We have been developing solutions and machines for steel fabricators over 50 years. As a solution to decreasing labor supply and rising labor costs, we are focusing on automation. Our goal is to reduce production costs and increase profit margins. Voortman CNC Beam Drilling lines can provide the best in productivity, accuracy, and reliability. Our CNC Beam Drill Lines incorporate many functions, such as drilling and milling, marking and countersinking. They also allow for thread-tapping and other tasks to improve productivity and optimize workflow. Voortman provides a comprehensive range of Beam Drill Lines for all types of production.

How To Drill Through A Beam

Although 90% of support issues can be resolved by Voortman’ 24 Hour Tech Support center, an expansive network of 50+ Voortman field service personnel are stationed throughout North and South America, Europe, Africa, Asia, Russia, the Middle East and Australia/New Zealand.

GSS Machinery's magnetic brush, broom and magnet brush help to remove chips from machines and sweep up chips on the floor.

How To Drill Through A Beam

What are the difference between T-beam and I beam

CNC Drill Line is able to import DXF files. It can then use these files to create 3-D shapes, provided that the steel has been detailed according to certain rules. These rules may not be applicable to your current detailing and might need some adjustments. This process is not as smooth as the 3-D modeling software.

Renishaw 5-Axis Calibration - This calibration unit is a Renishaw model APCA45, with a modified spherical tip. To remove dust and debris during activation, the device comes with a retractable cover. It attaches to a swing arm that is controlled by a pneumatic motor. This allows it to be out of the way during normal operation, and then swings into the calibration position.

Machine

Voortman proudly offers technical support 24 hours a day to its global clients. Voortman’s inside service staff have years-long experience in the field or assembly. They also have hands-on knowledge with many machines. Voortman's service personnel are always available to help you with any question that might arise.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Cnc Beam Drill Line Jack
How To Drill Through A Beam

Check our other pages :

Quality

To service our global clientele, Voortman proudly provides our partners with 24 hour technical support. Voortman’ inside service staff have years of experience in the field, assembly, or factory checkout which provides them with hands-on experience with most machines. At Voortman their service staff is not only available when you need them, but they maintain superior knowledge to solve questions as they arise.

Saw measurement options are available via the Voortman AccuMeasure Roller Feed measurement system. The AccuMeasure allows for complete handling versatility, while maintaining a streamlined CNC solution. Splitting apart a drill and a saw allows neither machine to wait for the other, maximizing production.

Frequently Asked Questions

Alloyed high-speed steel (HSS) is used to make drills. This tool steel can reach temperatures up to 600 degrees Celsius, which is possible when cutting e.g. steel and metals. You can use high-speed steel with a higher amount of cobalt (5% or more) as the material hardens.

A purlin measuring six inches can extend to 18 feet

Round tubes are the strongest by weight. It is more resistant to bending and twisting than rectangular or square tubing with the same chemical composition and dimensions.

Avoid drilling vertical holes through LVL beams if the beam width is less than 3-1/2 inches. Before drilling vertical holes through LVL beams, consult an engineer or an architect who is qualified in wood design.

The hole size should not exceed 38mm (1.25 in.). The beam depth should not exceed one-tenth of the hole diameter, whichever is less, with the exception being 25mm (1 in.).